Ignition Pulse Generator Inspection; Ignition Coil Removal/Installation - KYMCO DINK 125 Service Manual
Hide thumbs
Also See for DINK 125:
- Service manual (224 pages) ,
- Owner's manual (104 pages) ,
- Specifications (1 page)
Table of Contents
Advertisement
17
. IGNITION SYSTEM
IGNITION PULSE GENERATOR
INSPECTION
Remove the luggage box (refer to the
"FRAME COVERS
REMOVAL/INSTALLATION" section in
the chapter 2).
Disconnect the ignition pulse generator
connector (1).
Measure the ignition pulse generator
resistance between the Green/White wire and
Blue/Yellow wire.
Standard: 106Ω (20ºC/68ºF)
IGNITION COIL
REMOVAL/INSTALLATION
Remove the luggage box (refer to the
"FRAME COVERS
REMOVAL/INSTALLATION" section in
the chapter 2).
Disconnect the spark plug cap from the spark
plug (1).
17-5
DINK 50/125
- Quick Links:
- Specifications (Dink 50)
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
