10
. A.C. GENERATOR/STARTER CLUTCH
Install the A.C. generator stator and pulser
coil onto the right crankcase.
Tighten the stator and pulser coil bolts.
Torques: Pulser Coil : 0.45~0.6kgf-m
Stator
Install the A.C. generator wire rubber sleeve
and A.C. generator wire set plate.
Connect the A.C. generator wire connector.
Clean the taper hole in the flywheel off any
burrs and dirt.
Install the woodruff key in the crankshaft
keyway.
: 0.8~1.2kgf-m
Bolts
Bolts
Connectors
Woodruff Key
DINK 50/125
10-14