Oil Filter Replacement (Dink 125 Only) - KYMCO DINK 125 Service Manual

3
. INSPECTION/ADJUSTMENT
Oil filter replacement(DINK 125 only)
Change the engine oil with the engine at
normal operating temperature and the scooter
on its center stand to assure complete and
rapid draining.
＊
Let the engine and exhaust system cool
before working in those areas.
1. Remove the oil filler cap/dipstick (1) from
the right crankcase cover.
2. Place a drain pan under the crankcase.
Remove three bolts and then remove the
oil filter cap (2) and O-ring (3).
The spring (4) will come out when the
filter cap is removed.
Let the engine oil drain out.
3. Remove and discard the oil filter (5).
＊
Do not remain the rubber seal on the oil
filter in the oil filter housing.
4. Check that the O-ring is in good condition.
3-9
DINK50/125