Exhaust Muffler Removal/Installation - KYMCO DINK 125 Service Manual

2
. EXHAUST MUFFLER/FRAME COVERS
EXHAUST MUFFLER
REMOVAL
Remove the two exhaust pipe joint nuts
Remove three muffler mount bolts and
muffler and gasket.
INSTALLATION
Replace the gasket with new ones.
Install the exhaust muffler and three
mounting bolt but do not tighten them.
Install and tighten the two exhaust pipe joint
nuts to the specified torque
Torque: 20 N•m (2 kgf•m, 14 lbf•ft)
Tighten the three mounting bolts
Torque: 33 N•m (3.3 kgf•m, 24 lbf•ft)
2-15
Gasket
DINK 50/125