KYMCO DINK 125 Service Manual page 128

6
. CYLINDER HEAD/VALVES
Release the timing chain tensioner one-way
cam and push the tensioner rod all the way in.
Install a new cam chain tensioner gasket.
Install the cam chain tensioner and tighten the
two bolts to the specified torque.
Torque: 0.9 kgf-m (9 N-m, 6.5 lbf-ft)
Install the tensioner spring and tighten the
sealing bolt.
Torque: 0.9 kgf-m (9 N-m, 6.5 lbf-ft)
Adjust:
● valve clearance (refer to the "VALVE
CLEARANCE" section in the chapter 3).
6-13
Gasket
Sealing Bolt Cam Chain Tensioner
Spring
DINK 50/ 125
Bolt