KYMCO DINK 125 Service Manual page 238

11
. CRANKCASE/CRANKSHAFT
Place the left crankcase down and install the
crankshaft into the left crankcase.
＊
• Avoid damaging the oil seal.
• Apply grease to the lip of the oil seal.
Install the two dowel pins and a new gasket.
Place the right crankcase over the crankshaft
and onto the left crankcase.
＊
Install the right crankcase squarely and
do not tap it with an iron or plastic
hammer.
Install and tighten the right and left crankcase
attaching bolts.
Torque: 1 kgf-m (10 N-m, 7.2 lbf-ft)
11-7
Dowel Pins
Right Crankcase
Left Crankcase
Bolts
DINK50/ 125
Gasket