KYMCO DINK 125 Service Manual page 353

Hide thumbs Also See for DINK 125:

Table of Contents

. REAR BRAKE/REAR FORK/REAR

WHEEL/REAR SHOCK ABSORBER

Install new pads so that their ends rest on the

pad retainer on the brake properly.

Install the pad pin by pushing the pads

against the pad spring to align the pad pin

holes in the pads and caliper.

Install the rear caliper onto the rear fork and

then install and tighten the new two caliper

mounting bolts to the specified torque.

Torque: 32 N-m (3.2 kgf-m, 23 lbf-ft)

Tighten the two pad pins to the specified

Torque: 18 N-m (1.8 kgf-m, 13 lbf-ft)

Show Quick Links

Table of Contents

Troubleshooting