Fuel Tank Removal (Dink 50); Fuel Strainer Removal; Fuel Strainer Installation - KYMCO DINK 125 Service Manual

13
. FUEL SYSTEM/CARBURETOR/
FUEL PUMP/ FUEL TANK
FUEL TANK REMOVAL(DINK 50)
Remove the floor board.
Remove the leg shield.
Disconnect the fuel unit wire connector.
Remove the fuel tube between the fuel tank and the
fuel filler.
Disconnect the fuel vapor tube.
Remove the fuel tank.
The installation sequence is the reverse of removal.

FUEL STRAINER REMOVAL

Remove the fuel strainer from the fuel tank.
Inspection
Inspect if the fuel strainer is clogged and clean it
with compressed air.
＊
•When removing the fuel strainer, do
not allow flames or sparks near the
working area and drain the residual
gasoline into a container.
INSTALLATION
Install the fuel strainer with its arrow mark toward
the fuel pump.
13-43
Tube To Fuel Filler
Fuel Vapor Tube
Fuel Strainer
DINK 50/125
Fuel Unit
Fuel Strainer