Accelerator Pump Disassembly/Inspection; Auto Bystarter Installation - KYMCO DINK 125 Service Manual

Hide thumbs Also See for DINK 125:

Table of Contents

. FUEL SYSTEM/CARBURETOR/

FUEL PUMP/ FUEL TANK

ACCELERATING PUMP

Remove the two accelerating pump cover

screws and accelerating pump cover.

Remove the spring and accelerating pump

Inspect the accelerating pump diaphragm for

cracks, damage or deterioration. Replace if

Assemble the accelerating pump in the reverse

order of disassembly.

Install the auto bystarter and set plate.

Install and tighten the two screws.

• Insert the auto bystarter into the

carburetor body until it bottoms and

position the set plate into the upper

groove in the bystarter.

• Install the set plate with its round face

facing down.

By-starter Cap

Show Quick Links

Table of Contents

Troubleshooting