Crankcase/Crankshaft (Dink 50) Removal - KYMCO DINK 125 Service Manual

11
. CRANKCASE/CRANKSHAFT
CRANKCASE/CRANKSHAFT
(DINK 50)
REMOVAL
Remove nuts and take out the bolts from
center stand.
Remove spring and center stand from
crankcase.
Remove the crankcase attaching bolt.
Separate the left and right crankcase halves.
＊
• Do not damage the crankcase gasket
surface.
• Never use a driver to pry the crankcase
mating surfaces apart.
11-9
Nuts/Bolts
Center Stand
Bolt
DINK50/ 125
Spring