9
. FINAL REDUCTION
BEARING REPLACEMENT
TRANSMISSION CASE COVER
Remove the transmission case cover (refer
to the "FINAL REDUCTION" section in this
chapter).
Remove the transmission case cover
bearings by using the special tool.
Special tool:
Bearing puller A120E00037
Install the new bearings or new oil seal into
the transmission case cover by using the
special tool.
Special tool:
Oil seal and bearing installer
TRANSMISSION CASE
Remove the all transmission gears (refer to
the "FINAL REDUCTION REMOVAL/
INSPECTION/INSTALLATION" section in this
chapter).
Remove the transmission case bearings by
using the special tool.
Special tool:
Bearing puller A120E00037
A120E00014
DINK 125/50
9-8