5. ENGINE REMOVAL/INSTALLATION
ENGINE HANGER BRACKET
INSPECTION
Inspect the stopper rubbers and bushings for
damage and replace with new ones if
necessary.
ENGINE INSTALLATION
Install the engine in the reverse order of
removal.
*
Cables and wires should be routed
properly.
Torque Values:
Engine mounting bolt : 4.5~5.5kg-m
Rear shock absorber lower mount bolt:
Perform the following inspections and
adjustments after installation.
• Rear brake cable
5-13
2.4~3.0kg-m
Bushings
DINK 125
Bushings