Mechanical Seal Replacement; Water Pump Shaft Installation - KYMCO DINK 125 Service Manual

12
. COOLING SYSTEM

MECHANICAL SEAL REPLACEMENT

Drive the mechanical seal out of the water
pump assembly from the inside.
Drive in a new mechanical seal using a
mechanical seal driver.
＊
Apply sealant to the right crankcase
cover fitting surface of a new mechanical
seal and then drive in the mechanical
seal.

WATER PUMP SHAFT INSTALLATION

Drive a new water pump shaft outer bearing
into the water pump assembly from the
inside.
12-15
Water Pump Assembly
Mechanical Seal (Water Seal)
Mechanical Seal Driver
Outer Bearing
Water Pump Assembly
DINK50/ 125