Clutch, Drive And Driven Pulleys - KYMCO DINK 125 Service Manual

1. GENERAL INFORMATION

CLUTCH, DRIVE AND DRIVEN PULLEYS

Engine starts but motor-
cycle does not move
Motorcycle creeps or
engine starts but soon
stops or seems to rush
out (Rear wheel rotates
when engine idles)
Engine lacks power at
start of a grade(poor
slope performance)
Engine lacks power at
high speed
There is abnormal noise
or smell while running
Symptom
Probable Cause
Worn or slipping drive belt
Broken ramp plate
Broken drive face spring
Separated clutch lining
Damaged driven pulley shaft splines
Damaged final gear
Seized final gear
Broken shoe spring
Clutch outer and clutch weight stuck
Seized pivot
Worn or slipping drive belt
Worn weight rollers
Seized drive pulley bearings
Weak driven face spring
Worn or seized driven pulley bearings
Worn or slipping drive belt
Worn weight rollers
Worn or seized driven pulley bearings
Oil or grease fouled drive belt
Worn drive belt
Weak driven face spring
Worn or seized driven pulley bearings
DINK 50/125
1-40