16
. INSTRUMENT/SWITCHES/LIGHTS
Move the oil meter float up and down to see
if the oil indicator light will go out and come
on.
*
If the oil indicator light does not light,
check for burned bulb, loose wire or
connector. After correction, check
again according to the method
mentioned above.
SWITCHES
IGNITION SWITCH INSPECTION
Remove the front upper/lower cover. ( 2-3)
Disconnect the ignition switch wire couplers
and check for continuity between the wire
terminals.
Color
Red Black/White Green Black
Symbol BAT
1
LOCK
OFF
○
ON
IGNITION SWITCH REPLACEMENT
Remove the front upper/lower cover. ( 2-3)
Disconnect the ignition switch wire couplers.
Remove the two mounting bolts and remove
the ignition switch.
The installation sequence is the reverse of
removal.
IG
E
BAT
○
○
○
○
○
2
SUPER 9
Oil Indicator Light
Ignition Switch Coupler
Bolts
50
16-4