Drive Belt Inspection; Clutch Out Inspection - KYMCO DINK 125 Service Manual

8
. DRIVE AND DRIVEN PULLEYS/
KICK STARTER
Remove the movable drive face assembly.

Drive belt inspection

Check the drive belt for cracks, separation or
abnormal or excessive wear.
Measure the drive belt width.
Service Limit: 17.5mm (0.7 in)
＊
Use specified genuine parts for
replacement.

Clutch out inspection

Inspect the clutch outer for wear or damage.
Measure the clutch outer I.D.
Service Limit: 130.5 mm (5.22 in)
8-11
DINK 50/125
Movable Drive Face Assembly