Crankcase/Balancer Installation - KYMCO DINK 125 Service Manual

11
. CRANKCASE/CRANKSHAFT
CRANKCASE/BALANCER
INSTALLATION
Install the cam chain into the left crankcase.
Install the dowel pins and a new gasket onto
the left crankcase.
＊
Place the right crankcase over the
crankshaft and onto the left crankcase.
Install the crankshaft into the left crankcase.
＊
When installing the crankshaft, be
careful not to damage the oil seal.
Install the right crankcase.
Tighten the crankcase attaching bolt.
Torque: 0.8~1.2kgf-m
Bolt
DINK 50/ 125
11-12