Rear Wheel (Dink 50) Removal; Rear Wheel (Dink 50) Inspection; Rear Wheel (Dink 50) Installation - KYMCO DINK 125 Service Manual

15
. REAR BRAKE/REAR FORK/REAR
WHEEL/REAR SHOCK ABSORBER
REAR WHEEL(Dink 50)
REMOVAL
Remove the exhaust muffler.
Remove the rear axle nut to remove the rear
wheel.
INSPECTION
Measure the rear wheel rim runout.
Service Limits:
Radial : 2.0mm replace if over
Axial : 2.0mm replace if over
INSTALLATION
Install the rear wheel and apply SAE30# engine
oil to the axle threads. Then, tighten the rear
axle nut.
Torque values:
Rear axle nut: 11.0～13.0kg-m
15-27
Rear Axle Nut
Rear Axle Nut
DINK 50/125