Oil Pump Removal; Oil Pump Disassembly - KYMCO PEOPLE 250 Service Manual

4
. LUBRICATION SYSTEM
PEOPL E 250
Bolts

OIL PUMP REMOVAL

First drain the coolant.
Remove the right crankcase cover. ( 10-3)
Remove the A.C. generator starter driven
gear. ( 10-3)
Remove the attaching bolt and oil separator
cover.
Oil Separator Cover
Oil Pump Driven Gear
Circlip
Pry the circlip off and remove the oil pump
driven gear, then remove the oil pump drive
chain.
Oil Pump Drive chain
Bolts
Remove the two oil pump bolts to remove
the oil pump.
Oil Pump

OIL PUMP DISASSEMBLY

Remove the screw and disassemble the oil
pump as shown.
4-4