Oil Pump Removal; Oil Pump Disassembly - KYMCO GRAND DINK 125 Service Manual

4
. LUBRICATION SYSTEM
GRAND DINK 125/150
Bolts

OIL PUMP REMOVAL

First drain the coolant.
Remove the right crankcase cover. ( 10-3)
Remove the A.C. generator starter driven
gear. ( 10-4)
Remove the attaching bolt and oil separator
cover.
Oil Separator Cover
Pry the circlip off and remove the oil pump
driven gear, then remove the oil pump drive
chain.
Circlip
Oil Pump Driven Gear
Oil Pump
Remove the two oil separator bolts to remove
the oil pump.
Oil Separator

OIL PUMP DISASSEMBLY

Remove the screw and disassemble the oil
pump as shown.
4-4