Example: The gray stripe on the following test page extends up to around 16 near the Center line. From
the Yellow Linearity menu, enter 16 for the Center Adjustment value to move the gray stripe back toward 0.
14.
Repeat the color alignment process for Cyan and Magenta.
Redrive gears removal
See
"Left" on page 7-11
1.
Remove the top cover. See
2.
Remove the E-clip (A) and the washer behind it, and then remove the gears.
Note: You might need to use a flat-blade screwdriver to carefully pry the gears from the posts.
A=1126829
for the part number.
"Top cover removal" on page
4-28.
A
Repair information
5062
4-129