Lexmark C792e 5062-210 Service Manual page 86

5062
Error code
82 Waste Toner Missing
82.41
83.xx Transfer Module
Life Warning
83.xx Replace Transfer
Module
84.11 <color> PC Unit
Life Warning
84 Replace <color> PC
Unit
2-48
Service Manual
Action
• Insert the waste toner box.
• Check the cable in connector JBUMP1on the system board for defects and proper
connection. If the cable wiring or the cable connection is defective, replace the bump
multipurpose feeder/duplex motor assembly. See
page 4-51. If the cable in JBUMP1 connector is damaged on the system board, replace
the system board. See
• Check the aligner shaft and the mechanical system for binds.
• Replace the bump multipurpose feeder/duplex motor assembly. See
removal" on page 4-51.
• If the problem persists, replace the system board. See
page 4-142.
If you continuously get this error, then the problem is the aligner motor error. Go to
Staging motor error service check" on page
• Select Continue to clear the message and continue printing.
• Order a replacement transfer module. When print quality is reduced, install the new
transfer module using the instruction sheet that comes with the replacement transfer
module.
• If the problem persists, replace the system board. See
page 4-142.
• Replace the transfer module using the instruction sheet that comes with the replacement
transfer module. See "ITU assembly removal" on page
• If the problem persists, replace the system board. See
page 4-142.
• Select Ignore to clear the message and continue printing.
• Order the specified photoconductor unit. When print quality is reduced, install the new
specified photoconductor unit using the instruction sheet that comes with the replacement
specified photoconductor unit.
• If the problem persists, replace the system board. See
page 4-142.
• Replace the specified photoconductor unit using the instruction sheet that comes with the
replacement specified photoconductor unit.
• If the problem persists, replace the system board. See
page 4-142.
"System board removal" on page
2-73.
"Duplex assembly removal" on
4-142.
"Duplex assembly
"System board removal" on
"System board removal" on
4-72.
"System board removal" on
"System board removal" on
"System board removal" on
"147.xx—