Front access door beacon removal
See
"Waste toner left cover with beacon" on page 7-3
1.
Remove the waste toner left cover. See
2.
Remove the two screws (A) from the beacon cover, and then lift off the cover.
3.
Carefully pull the cable through the holes (B) to remove it.
Installation notes:
•
Feed the cable through the holes with the beacon-LED end first.
•
Place the beacon LED into the beacon cover so that the LED extends from the end.
for the part number.
"Waste toner left cover removal" on page
B
A(88A0323)
5062
4-32.
4-57
Repair information