Tray Jam Indicator (550-Sheet/2000-Sheet Input Option) Service Check; Tray Linking Service Check - Lexmark C792e 5062-210 Service Manual

Tray jam indicator (550-sheet/2000-sheet input option) service check

Step Questions / actions
1 1. POR the machine.
2. Simulate a paper jam by obstructing the
pass thru sensor.
3. Turn on machine.
Does the problem persist?
2 Be sure that JM LD (Jam clearance cover
LED) and Tray LD (tray LED) are connected
properly in the controller card.
Are the connectors connected properly on
the controller card?
3 For 550-sheet input option: Replace the
controller card assembly. See
tray controller card assembly removal" on
page 4-156.
For 2000-sheet input option: Replace the
controller card assembly. See
high-capacity feeder controller card
assembly removal" on page
Does the problem persist?

Tray linking service check

Tray linking is useful for large print jobs or multiple copies. When one linked tray is empty, paper feeds from the
next linked tray. When the Paper size and Paper Type settings are the same for any trays, the trays are
automatically linked.
Step Questions / actions
1 Load the same size and type of paper in each
tray. Move the paper guides to the correct
positions for the paper size loaded in each tray.
Does tray linking work properly?
2 Print a menu settings page from the Admin
Menu, and compare the settings for each tray.
Are the settings for each tray to be linked
the same for paper type and paper size?
Go to step 2.
Go to step 3.
For 550-sheet input option:
"550-sheet Replace the drawer
assembly. See
drawer assembly
removal" on page
"2000-sheet For 2000-sheet input
option: Replace the drawer
4-174. assembly.
Problem solved.
Problem solved.
Yes
Problem solved.
Properly connect all
connectors.
Problem solved.
"550-sheet
4-155.
Yes
Go to step 2.
In the Admin menus, set the
same settings for paper size
and paper type in each tray.
Diagnostic information
5062
No
No
2-139