Finisher Or Stacker Standard Output Bin Led And Led Lens Removal - Lexmark C792e 5062-210 Service Manual

5062

Finisher or stacker standard output bin LED and LED lens removal

See "Finisher assembly" on page 7-23
1.
Remove the option from the printer.
2.
Remove two screws (A), and pull out the sensor cover.
3.
To remove the LED, remove the screw (B), and then disconnect the cable from the LED card.
4.
To remove the lens, remove the screw (B) and the screw (C), and then remove the lens.
4-264
Service Manual
for the part number.