Aligning The Printhead; Dual Diode Alignment - Lexmark C792e 5062-210 Service Manual

5062
12.
Attach the front bracket, and tighten the screws (E).
13.
Reprint the alignment page and adjust the screw if necessary.

Aligning the printhead

There is one printhead that houses the four color planes. The black plane is aligned to the printer, and the color
planes are aligned to black. After you install the printhead and adjust the course alignment with the alignment
screws, use the Diagnostic menu to fine tune the alignment.

Dual diode alignment

1.
From the Diagnostic menu, navigate to:
DUAL DIODE ADJUST > Diode Alignment Page
An alignment test page prints.
4-124
Service Manual