Mottle (2-5Mm Speckles); Paper Curl; Print Irregularities - Lexmark C792e 5062-210 Service Manual

5062
Mottle (2–5mm speckles)
Leading edge
Trailing edge
Keep running prints through, and the problem normally clears up. If the problem persists, replace the print
cartridge causing the spots.

Paper curl

•
CHECK THE PAPER TYPE AND WEIGHT SETTINGS
Make sure the paper type and weight settings match the paper loaded in the tray:
1.
From the printer Paper menu, check the Paper Type and Paper Weight settings.
2.
Before sending the job to print, specify the correct type settings from the computer:
•
•
•
LOAD PAPER FROM A FRESH PACKAGE
Paper absorbs moisture due to high humidity. Store paper in its original wrapper until you use it.

Print irregularities

Leading edge
Trailing edge
Try one or more of the following:
•
LOAD PAPER FROM A FRESH PACKAGE
The paper may have absorbed moisture due to high humidity. Store paper in its original wrapper until you
use it.
•
CHECK THE PAPER TYPE AND WEIGHT SETTINGS
2-30
Service Manual
For Windows users, specify the setting from Print Properties.
For Macintosh users, specify the setting from the Print dialog.