Htu Sensor (Empty Bin) Removal - Lexmark C792e 5062-210 Service Manual

HTU sensor (empty bin) removal

1.
Remove all output options from the printer.
2.
Remove the rear standard bin cover. See
3.
Disconnect the sensor cable (A) from the controller card.
4.
Remove the output bin. See
5.
Press tabs to pull out the sensor.
6.
Pull the cable through the frame to remove the sensor.
"HTU rear standard bin cover removal" on page
"HTU output bin removal" on page 4-289.
Repair information
5062
4-296.
4-305