Finisher Or Stacker Sensor (Bin-Full Send) Removal - Lexmark C792e 5062-210 Service Manual

3.
Remove the two screws (A) securing the sensor.
4.
Disconnect the cable, and remove the sensor.

Finisher or stacker sensor (bin-full send) removal

See XXXX for the part number.
1.
Remove the option from the printer.
2.
Remove the finisher or stacker controller card assembly. See
assembly removal" on page
3.
Remove the two screws (A) securing the sensor.
4.
Disconnect the cable, and remove the sensor.
4-245.
"Finisher or stacker controller card
Repair information
5062
4-259