General Recorder Settings - Interlogix TruVision NVR 10 User Manual

Chapter 14: Device management

General recorder settings

Use the General Settings menu of Device Management to configure general recorder
options.
See Figure 27 and Table 15 on page 94 for the general options available. The changes
are immediately implemented once Apply is clicked to save the settings.
Figure 27: General settings of the recorder
Table 15: Description of the Monitor setup window: General settings
Option
1. Language
2. Device Name
3. Remote Control ID
4. Password Required
5. Enable Wizard
94
Description
Define the language of the system.
Select the desired language from the drop-down list and click Apply. The
language displayed changes immediately.
Default is English.
Define the recorder name. The default name is NVR 10.
Click the edit box and enter the new name from the soft keyboard.
The device number to use for the recorder when linking the device to a
remote control. The default value is 255.
Define whether a login password is required to open the menu.
Check the box to enable/disable and click Apply.
Default is Disable.
Immediately start Wizard without rebooting the system.
Check the box to enable/disable and click Apply.
Default is Enable.
TruVision NVR 10 User Manual