Interlogix TruVision NVR 10 User Manual page 20

Chapter 4: Operating instructions
Figure 3: NVR 10 front panel
16-channel model:
The controls on the front panel include:
Table 2: Front panel button description
Name
1. Live view button
2. Playback buttons
3. IR receiver
4. Direction
Enter button
5. Alarm button
6. USB Interfaces
7. Archive button
20
Description
Switch to live view mode.
See Table 3 on page 21 for a detailed description of all these
buttons for different tasks.
Reverse: In live view mode, use to play back the earliest
video. In playback mode, playback a camera in the reverse
direction.
Pause: In live view mode, freeze the last image of the live
display for all active cameras displayed. In playback mode, stop
playback.
Play: In live view mode, play 24-hour playback of the currently
selected camera. In playback mode, play back a camera in the
forward direction. In search mode, play back a selected video or
view a snapshot.
Receiver for IR remote.
To connect the remote control to the NVR, press the Device button,
enter the device address, and press Enter.
The DIRECTION buttons are used to navigate between different
fields and items in menus. In PTZ mode, it can control the
movement of the PTZ camera.
The ENTER button is used to confirm selection in any of the menu
modes.
See Table 3 on page 21 for a detailed description of these buttons
by different tasks.
Use to manually acknowledge an alarm.
In live view mode, contact the alarm recipient when an alarm/event
is triggered.
Universal Serial Bus (USB) ports for additional devices such as a
USB mouse, CD/DVD burner, and USB Hard Disk Drive (HDD).
Press once to enter quick archive mode. Press twice to start
archiving. If the flash drive has an LED, it will flash during archiving.
TruVision NVR 10 User Manual