Interlogix TruVision NVR 10 User Manual page 24

Chapter 4: Operating instructions
Figure 4: IR remote control
Item
1. Alarm
2. Device
3. Numeric buttons
4. Display
5. Mon A and Mon B Switch between monitors A and B.
6. Live
7. Menu
8. Seq
9. , , ,
10. OK
11. Zoom + and -
12. Preset
13. Tour
24
Description
Acknowledge an alarm.
Enable/disable the IR remote control to control the recorder.
Select a camera, and enter a number in a menu option.
Switch between the different multiview formats.
Return to live view mode.
Activate the main menu.
Start /stop sequencing.
In Menu mode: Use left or right arrow buttons to select and up or down
arrow buttons to edit entry.
In PTZ mode: Use to control PTZ.
In Playback mode: Use to control playback speed.
Confirm selection.
Use to control zoom of camera lens.
Enter preprogrammed three-digit code to call up a preset.
Enter preprogrammed three-digit code to call up shadow tour.
TruVision NVR 10 User Manual