Alarm Host Setup - Interlogix TruVision NVR 10 User Manual

trigger alarm host. See page "Types of system alarm notifications" on page 90 for
the descriptions. Click
7. Click OK to return to the main window
8. Click Copy to copy these settings to other cameras, if required, and then click
Apply to save the changes.
9. Click Exit to return to live view.

Alarm host setup

If an alarm host is set, the recorder sends a signal to the host when an alarm is
triggered. An example of an alarm host is the TruVision Navigator server. Note, that
alarm host applications need to have the TruVision recorder SDK implemented in order
to successfully receive notifications from the recorder.
To set up an alarm host:
1. From the menu toolbar, click
2. Enter Alarm Host IP and Alarm Host Port values.
Alarm host IP represents the IP of the remote PC where the Network Video
Surveillance software installed. The alarm host port value must be the same as
software's alarm monitor port. Up to three alarm hosts can be set. For each alarm
host, the default port is 5001, 5002, and 5003.
3. Click Apply to save the settings.
4. Click Exit to return to live view.
TruVision NVR 10 User Manual
Apply to save the settings.
Alarm & Event Setup
Chapter 13: Alarm and event setup
> Alarm Host Setup.
91