Export Network Packet Data; Network Statistics - Interlogix TruVision NVR 10 User Manual

: Network settings
3. If you need to check the current network parameters, click the
get an overview. The current values for NIC type, DHCP, IPv4 address, IPv4 subnet
mask, IPv4 default gateway are shown as well as the preferred DNS server and
alternate DNS server if used.
The NIC Type and
changes made and then click
4. Click Exit to return to live view.
To check network status:
1. When all the network parameters have been set, click the
that all parameters are operating correctly.

Export network packet data

When the recorder is connected to a network, you can export the captured data packet
to a USB-flash drive, SATA/eSATA CD-RW and other local backup devices.
To export network packet data:
1. From the menu toolbar, click
2. Under the section "Network Packet Archive", click
backup devices available. Select one from the list.
3. Click Export. Up to 1M of data can be exported at a time.
4. Click Exit to return to live view.

Network statistics

You can easily check the bandwidth that is being used by remote live view and
playback.
To check network statistics:
1. From the menu toolbar, click
2. The latest information is displayed on the bandwidth used by remote live view and
playback as well by Net Receive Idle and Net Send Idle. Click
the information.
3. Click Exit to return to live view.
TruVision NVR 10 User Manual
Enable DHCP options can be changed. Click
OK to return to the main window.
Network Settings
Network Settings
Network
Apply
Status button to confirm
> Net Detect.
Refresh to get a list of the local
> Net Statastics.
Refresh
button to
to save any
to update
81