Single And Multiview Display Mode; Sequencing Cameras - Interlogix TruVision NVR 10 User Manual

Name
5. Next Screen
6. Start Sequence
7. 24-hour Playback
8. Search Video
9. Picture Mode

Single and multiview display mode

The recorder has single and multiview formats. The number of multiview display modes
available depends on the recorder model.
Single view display
format
Multiple view display
format

Sequencing cameras

The sequencing feature allows a camera to be displayed briefly on screen, before
advancing to the next camera in the sequence list. Sequencing can only be done in
single-view display mode.
The default sequence displays each camera in numerical order. However, each camera
on the main and event monitors can have a pre-programmed dwell time and sequence
order. See "Layout" on page 53 for more information.
Note: Dwell time must not be set to zero for sequencing to function.
TruVision NVR 10 User Manual
Description
Displays the next camera.
Turn on sequence mode. The window automatically sequences
between cameras. To set up the sequence dwell time, go to Menu >
Display Settings > Display > Sequence Dwell Time and select a
value.
Playback the recorded video of the selected day from the selected
camera. The current day is selected by default. See "24-hour
playback" on page 45 for more information.
Enter the advanced video search menu. See "Search video menu" on
page 36 for more information.
Select Standard, Bright, Soft, or Vivid mode to display.
Press the numeric button on the front panel to switch to the corresponding
camera display. For example, press button 10 to view camera 10.
-Or-
Right-click the mouse and select
required camera from the list.
Press the Display button on the front panel to cycle through different display
formats.
-Or-
Right-click the mouse and select
desired multiview display layout.
Single Camera from the menu. Select the
Multi Camera from the menu. Select the
Chapter 5: Live view
31