Buzzer Settings; Alarm Notification Types - Interlogix TruVision NVR 10 User Manual

Buzzer settings

When an alarm is triggered by the system or a camera, the recorder can be set up to
respond with a warning buzzer. The buzzer time is the time that it takes for the recorder
to time-out the buzzer when a continuous alarm occurs. For example, when a physical
alarm input is continuously triggered, the buzzer will time out after the time specified.
Select Alarm & Event Setup > Buzzer Settings
system and camera alarms. Select Mute, 5 s, 10 s, 20 s, 30 s, 60 s, 120 s, 240 s, or
Constant. Default is mute.

Alarm notification types

When setting up the rules for alarm detection, you can specify how you want the
recorder to notify you about an alarm or event. You can select more than one
notification type.
Not all notifications types are available for all types of alarms.
You can quickly check the system status by looking at the status LEDs on the front
panel.
The alarm notification types are:
• Display Event Icon: When an alarm is triggered in the system, an icon appears on
screen to also alert you. See "Status information" on page 29 for further information.
• Notification Type: Select HDD Full, HDD Error, Network Disconnected, Duplicate
IP Address Found, Illegal Login, Abnormal Record, and PoE Power Overload.
• Enable Alarm Audio: Triggers an audible beep when a notification or alarm is
detected by the system or a camera.
• Notify Alarm Host: Sends a signal to TruVision Navigator or other software
applications when an alarm or notification is detected.
• Send Email: Sends an email when an alarm or notification is detected. See ""E-mail
settings" on page 77 for information on how to configure the recorder to send an
email.
• Trigger Alarm Output: Triggers an alarm output or multiple alarm outputs when a
notification is detected for an external alarm. See "Types of system alarm
notifications" on page 90 for information on configuring an alarm output.
To set up system notifications:
1. From the menu toolbar, click
2. Select a system alarm notification type.
3. Check one or more response method: Display event icon, notification type, enable
alarm audio, notify alarm host, send email, and trigger alarm output.
Note: The list of options available depends on the system alarm selected.
TruVision NVR 10 User Manual
and select a buzzer time limit for the
Alarm & Event Setup
Chapter 13: Alarm and event setup
> Notification.
89