Snapshots; Camera Osd - Interlogix TruVision NVR 10 User Manual

Chapter 10: Camera setup
To display the PoE power consumption information:
1. From the menu toolbar, click
2. Select the PoE type required for each camera: No PoE, PoE-af, PoE-at, or 15.0 W.
3. Click Apply to save the settings and then click

Snapshots

You can define the image quality and resolution of snapshots for each camera.
Snapshots can be taken at any time during live view or playback, or can be created
when an alarm occurs and sent by email or sent to an FTP server.
To configure snapshots:
1. From the menu toolbar, click
2. Select the desired camera.
3. Select the snapshot resolution from the drop-down list.
Select QCIF, CIF, 4CIF, or Maximum. Maximum is the maximum available
resolution from the camera. For IP cameras, this is the resolution being recorded.
4. Select the snapshot quality from the drop-down list (low, medium or high).
5. Click Apply to save the settings.
6. To copy the settings to other cameras, click
Click OK.
7. Click Exit to return to live view.

Camera OSD

The recorder lets you configure which information is displayed on-screen for each
individual camera.
The on-screen display (OSD) settings appear in live view mode and include the camera
name, time and date. They are part of the image and are therefore also recorded.
60
Camera Management
Back
Camera Setup > Snapshots.
Copy
> Camera > PoE
to return to live view.
and select the desired cameras.
TruVision NVR 10 User Manual
Setup.