Layout - Interlogix TruVision NVR 10 User Manual

Option
2. Resolution
3. Display Status Icons
4. Timebar Transparent
5. Enable Timebar
6. Video Output Interface
7. Default View
8. Sequence Dwell Time
9. Enable Audio Output
10. Event Monitor
11. Event Full Screen
Monitoring Dwell Time
12. Alarm Full Screen
Monitoring Dwell Time

Layout

The Layout window allows you to define the layout of each of the different views as they
are shown when selecting the different live views or the sequencing order.
The cameras are sequenced in numeric order by default. You can change the order of
the cameras for all monitors.
The camera order in the different views is consistent. This means that if Channel 2 is
the first camera shown in the single camera view then it will also be the top left camera
of the 4-channel view.
You can switch the channel of a camera with that of another camera in the system. This
lets you, for example, have the images of camera 1 appear on channel 10, and the
images of camera 10 appear on channel 1. This feature is useful when you want to
watch the sequence of images from specific cameras so that they are next to each
other on-screen.
TruVision NVR 10 User Manual
Description
Define the resolution of the selected monitor.
Select one of the options from the drop-down list and click Apply. The
selected resolution must be the same as that of the monitor.
Define whether the status icons are displayed. Default is Enable.
Select the transparency of the monitor output time bar on screen relative
to the background to make the time bar easier to read.
Check the box to enable/disable. Default is Disable.
Select whether the monitor output time bar appears on screen.
Check the box to enable/disable. Default is Enable.
Select the desired video output interface to apply: VGA/HDMI. Default is
VGA/HDMI.
The factory default multiview format displays all channels (2x2 layout for
the 4-channel NVR 10 and 4x4 layout for the 8/16-channel NVR 10).
Set the length of time for which a camera image is displayed on the
selected monitor before moving to the next camera during sequencing.
Default is off ("No Switch").
Select whether to hear audio from cameras in both live and playback
mode. However, in order to be able to hear audio in playback, you must
enable the audio output setting. Default is Disable.
Check the box to enable/disable audio output.
Select which monitor will be the event monitor showing full screen
monitoring in case of events: HDMI/VGA. Default is HDMI/VGA.
Set the length of time during which an image is displayed on the event
monitor in full screen in case of an event. Default is 10 seconds.
Set the length of time during which an image is displayed on the event
monitor in full screen in case of an alarm. Default is 10 seconds.
Chapter 9: Display settings
53