Interlogix TruVision NVR 10 User Manual page 21

Name
8. Display buttons
9. Menu and Search buttons
10. Numeric buttons
11. Status LEDs
Table 3: Front panel button functions by task
Task
Live view mode
Playback mode
TruVision NVR 10 User Manual
Description
See Table 3 below for a detailed description of all these buttons for
different tasks.
Display: In multiview mode, toggle through the various multiviews
(full, quad, 1+5, 1+7, 9, and 16).
In HDD information mode and user management mode delete a
selected item. In PTZ mode, delete a selected key point. In Log
Search mode, display the details of a log file in Log Search result.
Seq: In Live View mode, start/stop sequencing cameras on the
current monitor.
Menu: Enter/exit the main menu.
Search: In live view, enter the advanced search menu.
Switch between different cameras in live, PTZ control or playback
modes.
Enter numerals 0 to 9 when using the virtual keyboard.
HDD: A steady GREEN light indicates that the NVR is accessing
the HDD in read or write operation. A steady RED light indicates
HDD failure.
Network: A steady GREEN light indicates that the NVR is currently
connected to a network. No light indicates that the NVR is not
connected to any network.
Internal: A steady GREEN light indicates that the NVR is currently
recording video/audio. A steady RED light indicates internal health
failure.
Alarm: A steady RED light indicates that there is a sensor Alarm In.
A steady GREEN light indicates no alarm.
Button Button function
Direction Press to cycle through channels.
Enter Press to show the PTZ control toolbar.
Reverse Press to play the earliest video file of the current camera (upper-
left video tile if in multiview mode).
Pause Press to freeze the last image of the live display for all active
cameras displayed.
Play Press to play 24-hour playback of the current camera (upper-left
video tile if in multiview mode).
Live Press to switch to live view mode.
Seq Press to start/stop sequencing cameras on the current monitor.
Hold the Seq button for three seconds to start and stop
sequencing.
Menu Press to enter the main menu.
Direction The left and right buttons are used to speed up and slow down
recorded video. The up and down buttons are used to jump
recorded video forwards or backwards by 30 s.
Chapter 4: Operating instructions
21