Items shipped with the product include:
•
IR (infrared) remote control
•
Two AAA batteries for the remote control
•
AC power cords
•
USB mouse
•
Brackets
•
Recorder
•
CD with software and manuals
•
TruVision NVR 10 Quick Start Guide
•
TruVision NVR 10 User Manual (on CD)
•
TruVision Recorder Operator Guide (on CD)
Back panel
The figures below show the back panel connections and describe each connector on a
typical NVR 10 digital video recorder. Details may vary for specific models.
Before powering up the recorder, connect the cameras and a main monitor for basic
operation. Once all required connections are done, enter the relevant data in the setup
wizard (see page 15).
Note:
For every hardwired alarm input, connect one wire to the input connection with
the alarm number label and one wire to a ground connection (labeled G).
Figure 1: NVR 10 back panel connections
Four-channel model:
TruVision NVR 10 User Manual
Chapter 2: Physical installation
11