Interlogix TruVision NVR 10 User Manual page 123

Figure 33: Remote browser configuration window (System Information window shown)
Table 18: Description of remote configuration menus
Menu Function
Camera Setup Camera Recording
Settings
Snapshots
Camera OSD
Motion Detection
Privacy Mask
Camera Tamper
Restricted Access
Camera
VCA
PTZ Preset/Tours
Network Settings Network Settings
PPPoE
DDNS
NTP
TruVision NVR 10 User Manual
Description
Define the general camera settings such as camera name,
stream record mode, resolution, frame rate, audio recording,
and pre and post event times. See "Camera recording
settings" on page 57 for more information.
Define the image quality of snapshots. See "Snapshots" on
page 60 for further information.
Define which information is displayed on-screen. See
"Camera OSD" on page 60 for further information.
Define motion detection parameters. See "Motion detection"
on page 62 for more information.
Define the on-screen privacy mask areas. See "Privacy
mask" on page 64 for more information.
Define the video tampering detection settings. See "Camera
tamper" on page 65 for more information.
Define the cameras whose images cannot be displayed by
those not logged in. See "Restricted access camera" on
page 65 for more information.
You can define an area on screen to enable a VCA alarm.
Define and select PTZ Presets and Tours.SD
Define the general network settings. See "Network settings"
on page 72 for more information.
Define the PPPoE settings. See "PPPoE settings" on page
74 for more information.
Define the DDNS settings. See "DDNS settings" on page 75
for more information.
Define the NTP server settings. See ""NTP server settings"
on page 76 for more information.
Chapter 18: Using the web browser
123