Camera Recording Settings - Interlogix TruVision NVR 10 User Manual

The cameras are added to the end of the list of devices.
5. To test if a camera connection is operational, select the desired camera from the list
of devices connected to the recorder and click Live. A pop-up window should
appear showing the camera's live view.
Note: If cameras still have default settings, they might have the same IP addresses.
This creates an IP conflict. Use the Edit button to assign a different IP address to
each camera. Before adding the IP camera to the recorder, use the Edit button to
assign a different IP address to each camera. Ensure that for each camera to
successfully connect the cameras.
To manually add an IP camera:
1. From the menu toolbar, click
2. Click Manual Add. In the pop-up window, enter the camera details such as the IP
camera address/domain, protocol, management port, user name and password.
Click OK.
The camera is added to the end of the list of devices.
Note: Only one camera can be manually added at a time.

Camera recording settings

The camera recording settings allow you to define the configuration per camera per
stream recording mode.
To configure recording settings:
1. From the menu toolbar, click
2. Select the camera you want to configure.
TruVision NVR 10 User Manual
Camera Setup > IP Camera
Camera Recording
Chapter 10: Camera setup
Status.
Settings.
57