Interlogix TruVision NVR 10 User Manual page 70

Chapter 10: Camera setup
Note: A preset tour should have at least two presets.
4. Repeat step 3 to configure other steps in the preset tour.
5. In the preset tour toolbar, click
6. Click Exit to return to live view.
To call up a preset tour:
1. Click the PTZ Settings
2. Select the desired preset tour from the list and click
to stop the preset tour.
3. Click Back to return to live view.
To delete a preset tour:
1. From the menu toolbar, click
2. From the preset tour list, select a tour number and click
the preset tour.
– Or –
In the preset tour toolbar, click
3. Click Exit to return to live view.
To set up a shadow tour:
1. From the menu toolbar, click
2. Select the shadow tour from the drop-down list.
3. To record a new shadow tour, click
control panel to move the camera along the desired path.
4. Click to save the shadow tour.
Note: The shadow tour can be overwritten.
5. Click Exit to return to live view.
70
to call up the preset tour.
icon on the menu toolbar and select
Camera Setup
to delete all the preset tours.
Camera Setup
and use the directional buttons on the PTZ
More
to start the tour. Click
> PTZ Preset/Tours.
to delete the selected
> PTZ Preset/Tours.
TruVision NVR 10 User Manual
Settings.