Interlogix TruVision NVR 10 User Manual page 93

Figure 26: Time and date settings window
Table 14: Description of the Time and Date settings window
Option
1. Time Zone
2. Date Format
3. Time Format
4. Display Day
5. System Date
6. System Time
7. Auto DST Adjustment
8. Enable DST
From
To
DST Bias
TruVision NVR 10 User Manual
Description
Select a time zone from the list.
Select the date format from the drop-down list. Default format is DD-
MM-YYYY.
Select either the 12-hour or 24-hour time format from the list. Default
format is 24-hour format.
Check to display the day of the week in the monitor time bar.
Check the box to enable/disable. Default is Disable.
Enter the system date.
Default date is the current date.
Enter the system time.
Default time is the current time.
Enable to activate DST is automatically. It depends on the time zone
selected.
Default is Disable.
Manually define DST. If this option is selected, the Auto DST
adjustment option is disabled.
Default is Disable.
Click the check box to enable or disable daylight savings time (DST).
Enter the start date and time for daylight savings.
Enter the end date and time for daylight savings.
Set the amount of time to move DST forward from the standard time.
Default is 60 minutes.
Chapter 14: Device management
93