Network Status - Interlogix TruVision NVR 10 User Manual

Chapter 11: Network settings
2. From the menu toolbar, click
3. Check the Enable UPnP
4. From Mapped Type,
If Manual is selected, enter the external ports and IP addresses required. Click the
Edit icon to change the values.
5. Click Apply to save the settings and click

Network status

You can easily check network traffic in order to obtain information about the recorder
such as its linking status, MAC address, MTU, sending/receiving rate, and NIC type.
The Network Detection window shows the network traffic between the recorder and
your local network. However, the traffic between the plug and play cameras and the
NVR 10 is not shown.
You can also check the network connection status by testing its delay and packet loss.
To check network traffic:
1. From the menu toolbar, click
appears. The information displayed is refreshed once a second.
To check network delay and packet loss:
1. From the menu toolbar, click
2. Under the section "Network Delay, Packet Loss Test", select the NIC to use and
enter the destination address. Click Test.
The test result appears in a pop-up window.
80
Network Settings
box.
select Auto or Manual.
Network Settings
Network Settings
> UPnP.
Exit to return to live view.
> Net Detect.
> Net Detect.
The Traffic window
TruVision NVR 10 User Manual