Interlogix TruVision NVR 10 User Manual page 17

Click Next to move to the next page, or
7. HDD management:
The hard drives are initialized at the factory. However if you wish to clear all data,
click Initialize to initialize the HDD and
to return to the previous page.
8. Adding IP cameras:
Note: You do not need to search for PoE cameras. They are automatically
recognized when plugged in.
Click Search to find any available IP cameras.
There are two ways to add an IP camera to the recorder system:
Manually: Enter the IP address of the IP camera to be added. Select the appropriate
protocol, stream number and management port and then enter User name and
Admin password, and then click the
page.
Automatically: Select the desired IP cameras from the search results list. Click
Quick Add to add the selected cameras to the recorder system without modifying
the camera configuration. The search list will display all supported IP cameras that
are located on the LAN.
Click Next to move to the next page, or
9. Recording configuration:
Configure your recording settings as required. The settings apply to all cameras
connected to the recorder.
TruVision NVR 10 User Manual
Previous to return to the previous page.
Next to move to the next page, or
Add button. Click, Next
Previous to return to the previous page.
Chapter 3: Getting started
Previous
to move to the next
17