Chapter 10: Camera setup
PTZ presets and tours
Presets are previously defined locations of an PTZ dome camera. It allows you to
quickly move the PTZ dome camera to a desired position. They are configured and
modified from the Camera Setup > PTZ Presets/Tours window (see Figure 22 below).
Tours are series of presets. Shadow tours allow you to record the manual movement of
a PTZ and follow the same tour at a later date.
Note:
The PTZ dome camera used must be able to support a preset command.
Figure 22: PTZ configuration window
Table 13: Description of the PTZ configuration window
Name
1.
Save preset
2.
Call preset
3.
Shadow tour toolbar
4.
Preset tour toolbar
68
Description
Saves preset.
Calls up pre-existing preset.
Starts recording the shadow tour.
Saves the shadow tour.
Starts the selected shadow tour.
Deletes the selected shadow tour.
Adds a step to a selected preset tour.
Starts the selected preset tour.
Stops the selected preset tour.
Deletes all the preset tour steps.
Scroll up the list.
TruVision NVR 10 User Manual