Ntp Server Settings - Interlogix TruVision NVR 10 User Manual

Chapter 11: Network settings
Note: You cannot have two recorders with the same host name.
To set up DDNS:
1. From the menu toolbar, click
2. Check the Enable DDNS
3. Select one of the DDNS types listed:
ezDDNS: Click the
displayed. If no host name is specified, the DDNS will allocate one automatically.
The maximum length for the host name field is 64 characters. This limit does not
include tvn-ddns.net. An example of a host name could be max64chars.tvr-ddns.net.
- Or -
DynDNS: Select
recorder domain name field, enter the domain name obtained from the DynDNS
web site. Then enter your user name and password registered in the DynDNS
network.
For example:
Server address: members.dyndns.org
Domain: mycompanydvr.dyndns.org
User name: myname
Password: mypassword
- Or -
NO-IP: Enter server address (for example, dynupdate.no-ip.com). In the host name
field, enter the host obtained from the NO-IP web site. Then enter the user name
and password that are registered with the No-IP network.
4. Ask your ISP service provider for your DNS server address or look it up in the
browser interface settings of your router.
Go to Network Settings
addresses as well as the default gateway address.
5. Click Apply to save the settings and click

NTP server settings

A Network Time Protocol (NTP) server can also be configured on your recorder to keep
the date and time current and accurate.
76
Network Settings
box to enable this feature.
Get URL button. The URL address to access the unit is
DynDNS and enter the server address for DynDNS. In the
and enter the preferred and alternate DNS server
> DDNS.
Exit to return to live view.
TruVision NVR 10 User Manual