Monitor Connections; Rack Mounting - Interlogix TruVision NVR 10 User Manual

Chapter 2: Physical installation
Eight-channel PoE model:
1. Embedded PoE ports to connect up to eight IP
cameras (depending on model).
2. Connect up to four alarm inputs and one alarm
relay output.
3. Connect to a network.
4. Connect an RCA connector for audio input
5. Connect to speakers for audio output.
6. Connect to a VGA monitor.

Monitor connections

Connect the unit to a monitor via an appropriate cable with the VGA/HDMI connector.
The recorder provides a 1 Vp-p CVBS signal. See Figure 1 on page 11 for connecting a
monitor to a recorder.
The recorder supports up to 1280 × 1024 / 60 Hz resolution in VGA/HDMI. The monitor
resolution should be at least 800 × 600. Adjust your monitor accordingly to this
resolution.

Rack mounting

The TVNc models have a 1U desk-based chassis. They are not rack mountable.
12
7. Connect to an HDTV. The HDMI connection
supports both digital audio and video.
8. Universal Serial Bus (USB 3.0) port. Connect
to an additional device such as a USB mouse,
CD/DVD burner or USB HDD.
9. Connect to ground.
10. Connect to a power cord.
11. Connect to a 12 VDC power supply.
TruVision NVR 10 User Manual