Interlogix TruVision NVR 10 User Manual page 63

Click Full Screen
5. Set the sensitivity level.
Drag the Sensitivity scroll bar to the desired sensitivity level. Default is 3.
6. Specify the target size.
In the Target Size option, specify how many grid squares must be activated before
motion is detected. Enter a value between 0 and 255 squares. Default is 1 square.
7. Select the cameras that will start the motion recording schedule once motion is
detected.
Click Actions. The Actions window appears. Click the
select the cameras that will record when a motion alarm is triggered. Click
save the settings.
8. Select the arming schedules for motion detection.
In the Actions window, click the
week and the time periods during the day when motion can be recorded. You can
schedule up to eight time periods in a day. Default is 24 hours.
Click Apply to save the settings. Click
the week.
Note: Time periods defined cannot overlap.
9. Link the corresponding action to motion detection.
In the Actions window, click the
the recorder to notify you of the alarm (see page 89 for the list of alarm notification
types available). "Notify Alarm Host" is the default selection. More than one option
can be selected.
Click Apply to save
10. Click OK to return to the motion detection settings window.
11. Click Exit to return to live view.
TruVision NVR 10 User Manual
to activate the whole screen or
Arming Schedule
Actions
settings.
Clear to clear the screen.
Trigger Channel
tab and select the day of the
Copy to copy the settings to other days of
tab to define the method by which you want
Chapter 10: Camera setup
tab and
Apply to
63